the radiation power loss from a magnetically confined plasma in a stellarator has been calculated using neoclassical particle and energy fluxes in an energy balance equation. we could obtain a power loss of about 34% of the total input power by numerical calculation. this fraction of the power loss has been found to be in good agreement with the experimentally measured values of 30-40% for our ...

The radiation power loss from a magnetically confined plasma in a stellarator has been calculated using neoclassical particle and energy fluxes in an energy balance equation. We could obtain a power loss of about 34% of the total input power by numerical calculation. This fraction of the power loss has been found to be in good agreement with the experimentally measured values of 30-40% for...

optimal reactive power dispatch (orpd) is a multi-variable problem with nonlinear constraints and continuous/discrete decision variables. due to the stochastic behavior of loads, the orpd requires a probabilistic mathematical model. in this paper, monte carlo simulation (mcs) is used for modeling of load uncertainties in the orpd problem. the problem is formulated as a nonlinear constrained mul...

this paper proposes a new method for transmission loss allocation. the share of each bus in the transmission line losses is determined using transmission line loss equations with respect to bus-injected currents. then, it is applied to the total network transmission lines. in the proposed method, comparing with other methods, a solution to remove the negative loss allocation has been introduced...

optimal capacitor placement, considering power system loss reduction, voltage profile improvement, line reactive power decrease and power factor correction, is of particular importance in power system planning and control. the distribution system operator calculates the optimal place, number and capacity of capacitors based on two major purposes: active power loss reduction and return on invest...

dynamic economic load dispatch is one of the most important roles of power generation’s operation and control. it determines the optimal controls of production of generator units with predicted load demand over a certain period of time. economic dispatch at minimum production cost is one of the most important subjects in the power network’s operation, which is a complicated nonlinear constraine...

Optimal capacitor placement, considering power system loss reduction, voltage profile improvement, line reactive power decrease and power factor correction, is of particular importance in power system planning and control. The distribution system operator calculates the optimal place, number and capacity of capacitors based on two major purposes: active power loss reduction and return on invest...

in this paper, reconfiguration problem of distribution network has been investigated toimprove reliability and reduce power loss by placement of renewable energy sources; i.e. solarcell and wind turbine. for this, four reliability indices are considered in objective function;which are as follows: system average interruption frequency index (saifi), system averageinterruption duration index (sai...

in this paper, a new combined power and refrigeration cycle is proposed, which combines the rankin power cycle and the ejector refrigeration cycle. this combined cycle produces both power output and refrigeration output simultaneously. this cycle is driven by the flue gas of gas turbines, industrial waste heats, solar energy and geothermal energy. an exergy analysis is performed to guide the th...

Distributed Generations (DGs) are utilized to supply the active and reactive power in the transmission and distribution systems. These types of power sources have many benefits such as power quality enhancement, voltage deviation reduction, power loss reduction, load shedding reduction, reliability improvement, etc. In order to reach the above benefits, the optimal placement and sizing of DG is...